Mag-Float Pad & Felt Replacement for Glass Aquariums up to 350 gallons

Replacement pad for the Float-350
Floating glass aquarium cleaner

Have you used your Mag-Float so much that the velcro has started to wear out? We understand. It is a wonderful product, and the magnet may last forever but the felt/velcro will not! The good news is you don’t have to go out and replace the whole thing. This is the replacement pad and felt for your Mag-Float.

Felt is applied to the magnet that contains logo Mag-Float.
Pad is applied to the magnet that does not contain the Mag-Float logo.

Instructions on how to change the pad/felt:

Remove old pad/felt entirely without damaging the plastic surface of the magnet.
Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (Use latex gloves).
Wait until plastic surface is completely dry before applying new pad/felt.
Peel back paper backing from new pad/felt approximately a quarter of the way.
Line up the new pad/felt with the plastic surface area of the magnet.
Apply pressure to the pad/felt are that has been peeled off so it glues on to the plastic surface of the magnet.
Apply pressure to the rest of the new pad/felt as you slowly remove the rest of the paper backing (This will avoid any air bubbles to be formed between the plastic surface and pad/felt).